底塗界面劑,各式添加劑及其它
Products
水泥砂漿增強劑
ARDEX Abacrete
- 液體聚合體添加劑，提昇對低吸水率磁磚的結合力，如：玻璃馬賽克
- 抗水性
- 可適應溫度變動
- 無毒 / 非燃性
- 產品資訊
產品資訊 ARDEX Abacrete
產品敘述
ARDEX Abacrete 特別設計為和ARDEX 系列黏著劑、水泥砂漿或水泥混合使用。當與水泥基礎黏著劑混合時，可增強防水性也可提昇對低吸水率磁磚的結合力，如：玻璃馬賽克。ARDEX Abacrete 可使用於室內及室外。大幅超越Australian Standard AS2358-1990, British Standard BS5980-1980 和ANSI A118-4-1992 標準。
應用界面
混凝土、水泥粉光層、水泥打底層、砌磚
包裝及儲存
20 公斤桶裝。
在23℃及50%相對濕度、陽光不直射乾燥環境下，未打開之原包裝，約可儲存12 個月。
- 物性資料
物性資料 ARDEX Abacrete
顏色: 乳白色稀釋液劑
比重: 約 1.01 kg/litre
PH: 9.0~11.0
黏度 3200~4200 cps
技術資料:
ARDEX Abacrete / 水泥- 底塗泥漿:
混合比例: 10 L 未稀釋 ARDEX Abacrete : 20kg
水泥
抗壓強度: 28 天 25.0 Mpa
曲折強度: 28 天 7.0 Mpa
黏結強度: 28 天 1.8 Mpa
ARDEX Abacrete / 水泥: 砂- 打底層:
混合比例: 27 L 稀釋ARDEX Abacrete : 40kg 水泥 : 120 kg 砂
可工作時間: 1 小時
抗壓強度: 28 天 21.0 Mpa
曲折強度: 28 天 5.0 Mpa
黏結強度: 28 天 1.4 Mpa
ARDEX Abacrete / 水泥: 砂- 半乾式地坪應用
混合比例: 13 L 稀釋ARDEX Abacrete : 40kg 水泥 : 120 kg 砂
抗壓強度: 28 天 35.0 Mpa
Consumption Calculator ARDEX Abacrete
Please refer to the technical datasheet.
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of kg bags required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of kg bags required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of kg bags required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Results
The number of kg required per square metre
Therefore: a kg unit will cover
m²
How many unit(s) will I need?
The number of kg unit(s) required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
